- ページ 8

モニター Dell D1626HT - UltraScan 1600HS - 21" CRT DisplayのPDF サービスマニュアルをオンラインで閲覧またはダウンロードできます。Dell D1626HT - UltraScan 1600HS - 21" CRT Display 48 ページ。 Color monitor
Dell D1626HT - UltraScan 1600HS - 21" CRT Display にも：サービスマニュアル (48 ページ)

ページを印刷する

Customizing Your Monitor

Adjusting the Settings

1 Using the COLOR OSD

You can adjust the monitor's color temperature using the

COLOR OSD. For example, you can adjust the monitor to

match the colors of a printed picture.

You can adjust the color temperature from 9300K (blue-white)

to 5000K (warm red).

This setting is stored in memory for all input signals.

1 Press the MENU button to display the MENU OSD.

2 Highlight the COLOR OSD using the BRIGHTNESS and

CONTRAST buttons and press the MENU button again.

3 Press the ? // buttons to select the color temperature.

There are three color temperature modes in the OSD.

The preset adjustments are: 5000K, 6500K and 9300K.

Fine tuning the color temperature

Press the ./> buttons to select an item and adjust the item by

pressing the ? // buttons.

Select R (red), G (green), or B (blue) BIAS to adjust the black

level of each color's signal.

Select R (red), G (green), or B (blue) GAIN to adjust the white

level of each color's signal.

The "5000K," "6500K" or "9300K" indication changes and the

new color settings are stored in memory for each of the three

color modes.

The color temperature mode indications change as follows:

5000K n 1, 6500K n 2, 9300K n 3

4 Press the MENU button once to return to the MENU OSD,

or press it twice to return to normal viewing.

2 Using the CENTER OSD

You can adjust the picture centering using the CENTER OSD.

This setting is stored in memory for the current input signal.

1 Press the MENU button to display the MENU OSD.

2 Highlight the CENTER OSD using the BRIGHTNESS and

CONTRAST buttons and press the MENU button again.

3 To adjust vertical centering, press the ¨ (BRIGHTNESS)

. /> buttons.

4 To adjust horizontal centering, press the > (CONTRAST)

? // buttons.

5 Press the MENU button once to return to the MENU OSD,

or press it twice to return to normal viewing.

All manuals and user guides at all-guides.com

3 Using the SCREEN OSD

You can adjust the convergence and landing of the picture and

cancel the picture's moire using the SCREEN OSD.

Convergence is the alignment of the Red, Green and Blue

electron beams on the screen. When convergence is not aligned,

red or blue shadows may be noticeable (especially with text)

which can affect the clarity or focus of the image.

Landing is used to correct color imbalances at the four corners

of the screen due to influence from the earth's magnetism.

Moire is a wavy or elliptical pattern which may appear on the

screen. The moire cancel adjustment is provided to eliminate

moire.

The CANCEL MOIRE setting is stored in memory for the

current input signal. All other settings are stored in memory for

all input signals.

1 Press the MENU button to display the MENU OSD.

2 Highlight the SCREEN OSD using the BRIGHTNESS and

3 Press the ¨ (BRIGHTNESS) ./> buttons to select the

4 Press the > (CONTRAST) ? // buttons to adjust the item.

5 Press the MENU button once to return to the MENU OSD,

Select

H CONVERGENCE

V CONVERGENCE

V CONVER TOP

V CONVER BOTTOM

LANDING

LANDING ADJUST

CANCEL MOIRE

MOIRE ADJUST

* CANCEL MOIRE must be "ON" for "

appear on the screen.

CONTRAST buttons and press the MENU button again.

desired adjustment item.

or press it twice to return to normal viewing.

adjust the horizontal convergence

adjust the vertical convergence

TOP

adjust the screen's upper vertical

convergence

BOT

adjust the screen's lower vertical

convergence

select one of the four corners that

needs color correction due to

influence from the earth's magnetism

ADJ

correct the color at one of the four

corners of the screen

eliminate elliptical or wavy lines on

the screen

adjust the degree of moire

cancellation

(MOIRE ADJUST)" to