- ページ 14

モニター Dell E170S - 17" LCD MonitorのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Dell E170S - 17" LCD Monitor 30 ページ。 Flat panel monitor
Dell E170S - 17" LCD Monitor にも：セットアップマニュアル (2 ページ), 仕様 (2 ページ)

ページを印刷する

Indicator

Direct-Access Functions

Function

Auto adjustment

Brightness/Contrast

Using the On-Screen Display (OSD) Menu

Accessing the Menu System

1. With the menu off, press the MENU button to open the OSD system and display the main features menu.

Function icons

Sub-Menu name

2. Press the - and + buttons to move between the function icons. As you move from one icon to another, the function name is highlighted to reflect the

function or group of functions (sub-menus) represented by that icon. See the table below for a complete list of all the functions available for the monitor.

3. Press the MENU button once to activate the highlighted function. Press -/+ to select the desired parameter, press menu to enter the slidebar

then use the - and + buttons, according to the indicators on the menu, to make your changes.

4. Press the MENU button once to return to the main menu to select another function or press the MENU button two or three times to exit from the OSD.

Icon

Menu Name

Description

and Sub-

menus

Adjustment Method

Use this button to activate automatic setup and adjustment. The following dialog will appear on

screen as the monitor self-adjusts to the current input:

Auto Adjustment

using 'Auto Adjustment', you can further tune your monitor by using the 'Pixel Clock' and 'Phase'

controls in the OSD.

NOTE: Auto Adjust will not occur if you press the button while there are no active video input

signals, or attached cables

With the menu off, press the

menu.

The 'Brightness' function adjusts the luminance of the flat panel.

Adjust 'Brightness' first, then adjust 'Contrast' only if further adjustment is necessary.

"+" increase 'brightness'

" - "decrease 'brightness'

The 'Contrast' function adjusts the degree of difference between darkness and lightness on the

display screen.

"+" increase the 'contrast'

"-" decrease the 'contrast'

Main Menu

Menu icon

Resolution

Auto Adjustment in Progress...

button allows the monitor to self-adjust to the incoming video signal. After

button to display the 'Brightness' and 'Contrast' adjustment