- ページ 28
モニター Dell E248WFP - 24" LCD MonitorのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Dell E248WFP - 24" LCD Monitor 31 ページ。 Dell flat panel monitor quick setup guide
Dell E248WFP - 24" LCD Monitor にも： セットアップマニュアル (2 ページ), ユーザーマニュアル (31 ページ)
ページを印刷する
Back to Contents Page
Solving Problems
Dell™ E248WFP Flat Panel Monitor
Monitor Specific Troubleshooting
Common Problems
Product Specific Problems
CAUTION:
Before you begin any of the procedures in this section, follow the
Troubleshooting Your Monitor
Self-Test Feature Check (STFC)
Your monitor provides a self-test feature that allows you to check whether your monitor is functioning properly. If your monitor and computer are properly
connected but the monitor screen remains dark, run the monitor self-test by performing the following steps:
1. Turn off both your computer and the monitor.
2. Unplug the video cable from the back of the computer. To ensure proper Self-Test operation, remove the Analog (blue connector) cables from the back of
computer.
3. Turn on the monitor.
The floating 'Dell - Self-Test Feature Check' dialog box should appear on-screen (against a black background) if the monitor cannot sense a video
signal and is working correctly. While in self-test mode, the power LED remains green. Also, depending upon the selected input, one of the dialogs
shown below will continuously scroll through the screen.
4. This box also appears during normal system operation if the video cable becomes disconnected or damaged.
5. Turn off your monitor and reconnect the video cable; then turn on both your computer and the monitor.
If your monitor screen remains blank after you use the previous procedure, check your video controller and computer, because your monitor is functioning
properly.
OSD Warning Messages
For OSD-related issues, see
Common Problems
The following table contains general information about common monitor problems you might encounter.
Downloaded from ManualMonitor.com Manuals
OSD Warning Messages
Safety
Instructions.
or
or