- ページ 26

モニター Dell XPS One 24のPDF サービスマニュアルをオンラインで閲覧またはダウンロードできます。Dell XPS One 24 50 ページ。 Service manual

WLAN card

screws (2)

NOTICE:

force may damage the connectors.

NOTICE:

under the card. Also, ensure to remove the antenna cables from under the card.

6 To install a new WLAN card, align the notch on the card with the tab in

the connector slot.

7 Insert the WLAN card at a 45-degree angle into the system board

connector.

8 Replace the two screws that secure the WLAN card.

9 Connect the appropriate antenna cables to the WLAN card you are

installing. The WLAN card has three triangles on the label (black, gray,

and white):

•

Connect the black cable to the connector marked with a black

triangle.

•

Connect the gray cable to the connector marked with a gray triangle.

•

Connect the white cable to the connector marked with a white

triangle.

10 Replace the top shield (see "Replacing the Top Shield" on page 15).

11 Replace the computer cover (see "Replacing the Computer Cover" on

page 11).

Replacing the TV Tuner Card

1 Follow the procedures in "Before You Begin" on page 9.

2 Remove the computer cover (see "Replacing the Computer Cover" on

page 11).

3 Remove the stand (see "Replacing the Stand" on page 13).

Replacing Cards

The connectors are keyed to ensure correct insertion. Use of excessive

To avoid damage to the WLAN card, ensure that there are no cables

antenna cables (3)