- ページ 9

水システム EarthLinked HCM-1836CのPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。EarthLinked HCM-1836C 11 ページ。 Hybrid cooling module

Installation – Electrical and Start-Up

1. After turning "OFF" power to all EarthLinked

appropriate breakers remove the Hybrid Cooling Module control box access panel.

2. Connect appropriately sized line voltage wires and ground wire to the Hybrid Cooling

Module, as shown in Figure 5.

The Hybrid Cooling Module cabinet must have an unbroken ground. The

ground must be installed in accordance with applicable electrical codes.

Failure to follow this warning can result in injury, fire or death.

3. The Hybrid Cooling Module contains a pressure actuated fan speed control that has been

factory set for a pre-determined R-410A system condensing pressure.

4. Check all wiring and electrical connections to ensure proper routing and good

contact before restoring electric power, evacuating and recharging system in accordance

with the current EarthLinked

HCM-410CP-IM (12/15)

Figure 5. Hybrid Cooling Module Field Wiring

WARNING!

system installation manual.

and field supplied system components at the

Page 9