- ページ 6

水システム EarthLinked HCM-4272CのPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。EarthLinked HCM-4272C 11 ページ。 Hybrid cooling module

5. On a solid, level mounting pad. The mounting pad should extend a minimum of 2 inches

beyond the cabinet size of the Hybrid Cooling Module. The minimum pad size is to be 22

inches by 46 inches. The pad should NOT be in contact with or be an integral part of the

building foundation. The following DiversiTech Pads (or their equivalent) are recommended.

The standard pads are 2inches thick. Local building codes may require a 3 inch thick pad.

Model Number

Ultralite

Elite

6. Where conditions or local codes require the Hybrid Cooling Module to be attached to a

mounting pad or frame, tie down bolts should be used to fasten through the holes provided

in the Hybrid Cooling Module feet.

7. Elevate the Hybrid Cooling Module per local climate and code requirements to provide

clearance above estimated snowfall level and ensure adequate water drainage of Hybrid

Cooling Module. Use snow stand in areas where prolonged freezing temperatures are

encountered.

Do NOT Locate the Hybrid Cooling Module:

On brick, concrete blocks or unstable surfaces

Near clothes dryer exhaust vents

Near sleeping area or near windows

Under eaves where water, snow or ice can fall directly in the unit

Within clearance less than 2 Feet from a second unit

6. Within the minimum distance the Hybrid Cooling Module can be installed from the property

line, where local zoning ordinances apply.

HCM-410CP-IM (12/15)

UC2448-2

UC2448-3

EL3648-2

EL3648-3

Size, Inches

Comments

24 x 48 x 2

Fiber-cement construction

24 x 48 x 3

Fiber-cement construction

Plastic-drillable for securing

36 x 48 x 2

Plastic-drillable for securing

36 x 48 x 3

unit

Page 6