- ページ 42

ストレージ Dell DX6012SのPDF 設定・構成マニュアルをオンラインで閲覧またはダウンロードできます。Dell DX6012S 43 ページ。 Rack installation instructions — static rails
Dell DX6012S にも：補足マニュアル (4 ページ), ハードウェア取り付け説明書 (2 ページ), ユーザーマニュアル (46 ページ), インストールおよび設定マニュアル (35 ページ), スタートマニュアル (28 ページ), お知らせ (28 ページ), お知らせ (20 ページ), 概要 (19 ページ), 設定マニュアル (9 ページ), 設定マニュアル (9 ページ), リリースノート (8 ページ), 設定マニュアル (7 ページ), リリースノート (6 ページ), リリースノート (5 ページ), リリースノート (5 ページ), スタートマニュアル (47 ページ), インストール (2 ページ), ラックの設置 (2 ページ)

ページを印刷する

If for any reason the request is not successful, a 404 response code will be returned with a

descriptive message in the response body as to the encountered problem.

C.5. Enumerator Timeout

The DX Content Router Publisher will repurpose the existing configuration parameter called

subscriberTimeout. If an enumerator is not accessed using GET for a time period equal to

subscriberTimeout seconds, it will be automatically terminated and removed. The timeout period

applies to enumerators created for any channel of a Publisher service. It is configurable in the

publisher.cfg file, with a default value of 90000 seconds (25 hrs).

An individual Enumerator may override the publisher timeout value. This is done by including a

timeout query arg on the POST request, as follows:

POST /<channel>?start=<date-time1>&end=<date-time2>&type=UUID&timeout=86400 HTTP/1.1

C.6. Configuration and Status Query Arguments

The following can be supplied on either an enumerator Start or Next command:

Argument Name

version

context

maxItems

offlineAfter

errOfflineAfter

Description

Enumerator client's software version string.

When provided, this value will be displayed on

the Publisher console in association with the

channel/subscription rule set name.

The descriptive name for an enumerator

instance of a particular channel. When

provided, this value will be displayed onthe

Publisher console in the expandable section

with enumerator details.

Maximum number of items to send in this

request response. Sending a value of 0 is a

logical pause that changes the enumerator's

state to "Paused" on the Publisher console.

The enumerator will remain paused until a non-

zero maxItems value is received. If neither the

enumerator start or a next request specifies a

value for the maxItems parameter, Publisher

sets the maxItems value to 5000. A negative or

non-integer value is interpreted as a 0.

Number of seconds the Publisher should

wait after the last enumerator query before

declaring the enumerator as offline. When

used, this parameter should be some multiple

of the expected interval between enumerator

queries. When not specified, a default value for

offlineAfter will be derived from the Publisher's

"subscriberOfflineAfter" configuration value.

Number of seconds the Publisher should

wait after the last enumerator query before

showing an offline error. When used, this

parameter should be some multiple of the

Version 2.2

December 2010