- ページ 17
ストレージ Dell EqualLogic PS SeriesのPDF ハードウェア取扱説明書をオンラインで閲覧またはダウンロードできます。Dell EqualLogic PS Series 48 ページ。 Storage arrays
Dell EqualLogic PS Series にも: セッティング (2 ページ), ハードウェア取扱説明書 (50 ページ), ハードウェア・メンテナンス (46 ページ)
PS6210 Hardware Owner's Manual
2 Maintaining Drives
Installing a 2.5-inch Drive
The 2.5-inch drives are installed vertically, with the drive release latch on the top and the drive label on
the bottom.
1. Wear electrostatic protection when handling a drive. See
Protecting Hardware on page
1.
2. Open the drive release latch.
3. Hold the drive by the carrier and slide the drive most of the way into a slot (callout 1 in
Figure
11).
4. Push the drive completely into the slot (callout 2). The drive handle will begin to close onto the
drive (callout 3).
5. Push in the handle until you hear a click (callout 4).
Figure 11: Installing a 2.5-inch Drive
Verify that the new drive is operational by examining the LEDs on the front panel, as described in
Interpreting Drive LEDs on page
7. In addition, examine the GUI Member Disks window and the CLI
command output.
member select show disks
11