- ページ 20
ストレージ Dell EqualLogic PS5000のPDF ハードウェアマニュアルをオンラインで閲覧またはダウンロードできます。Dell EqualLogic PS5000 50 ページ。 Storage arrays
Dell EqualLogic PS5000 にも： ハードウェア・メンテナンス (46 ページ)
ページを印刷する
7. control module 0
Figure 12. Cabling an iSCSI SAN-Attached Cluster to a Dell EqualLogic PS6510 Storage Array
1. cluster node 1
2. cluster node 2
3. switch 0
4. switch 1
Cabling The Dell EqualLogic PS5000/PS5500 Storage Arrays
1.
Connect a network cable from the network switch 0 to Ethernet 0 on the control module 1.
2.
Connect a network cable from the network switch 0 to Ethernet 1 on the control module 1.
3.
Connect a network cable from the network switch 1 to Ethernet 2 on the control module 1.
4.
Connect a network cable from the network switch 1 to Ethernet 0 on the control module 0.
5.
Connect a network cable from the network switch 1 to Ethernet 1 on the control module 0.
6.
Connect a network cable from the network switch 0 to Ethernet 2 on the control module 0.
7.
Repeat steps 1 to 6 to connect the additional Dell EqualLogic PS5000/PS5500 storage array(s) to the iSCSI switches.
For more information, see the figures below.
20
5. Dell EqualLogic PS6510 storage system
6. control module 1
7. control module 0