- ページ 9
ストレージ Dell PowerEdgeのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Dell PowerEdge 20 ページ。 Vmware esxi software on servers
Dell PowerEdge にも： ポートフォリオ・マニュアル (27 ページ), クイックマニュアル (6 ページ), 使用マニュアル (44 ページ), システム管理マニュアル (28 ページ)
ページを印刷する
Figure 2. Installing the 12 Gbps SAS HBA controller
1.
SAS cables (2)
3.
12 Gbps SAS HBA PCIe connector
5.
12 Gbps SAS HBA controller
Cabling 12 Gbps SAS HBA controller installed on host
server to the storage enclosure
Perform the following steps to connect the 12 Gbps SAS HBA controller to the physical disk drives in
storage enclosures:
1.
Set up the 12 Gbps SAS HBA controller. See
2.
Connect the SAS cables such that the first four enclosures are daisy-chained with one of the
enclosures connected to a single port on the controller. The second four enclosures are daisy-
chained with one of the enclosures connected to the second port on the controller. See Figure 3.
NOTE: The controller supports up to eight enclosures only.
NOTE: For more information about the single-port and multi-chain configurations, see the
PowerVault system-specific manuals at dell.com/powervaultmanuals.
2.
SAS cable connectors (2)
4.
PCIe connector on the system board
Installing the 12 Gbps SAS HBA
controller.
9