- ページ 10

ストレージ Dell PowerVault 110TのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Dell PowerVault 110T 39 ページ。 Dell powervault 110t dlt vs160 tape drive - user's guide

Getting Started and Setup: Dell PowerVault 110T DLT VS160 Tape Drive User's Guide

NOTE: Install a SCSI host adapter in the selected server now, if necessary.

NOTE: If your SCSI host adapter already has a ribbon cable with an open 68-pin, high-density connector, you can use

the existing cable instead of the cable supplied with the PowerVault 110T DLT VS160 Tape Internal drive.

4. Locate the SCSI ribbon cable in the accessories package. Attach one end of the SCSI ribbon cable to the SCSI connector

on the rear panel of the PowerVault 110T DLT VS160 Tape Internal drive. The SCSI connectors are keyed, preventing

improper connection. Use a 50- to 68-pin adapter with "high-byte termination" if the existing SCSI cable uses a 50-pin

connector.

5. Attach the other end of the SCSI ribbon cable to the SCSI host adapter. The SCSI connectors are keyed, preventing

improper connection.

6. Locate an available power cable in the host server and attach it to the power connector on the rear panel of the PowerVault

110T DLT VS160 Tape Internal drive. The connectors are keyed, preventing improper connection.

Figure 3. Attach SCSI and power cables to drive

file:///C|/Users/rishi_sood/Desktop/Temp/MissingDocsPosted/110t_dlt/UG/setup.htm[3/8/2013 11:46:12 AM]