- ページ 7

ストレージ Dell PowerVault MD3200 SeriesのPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。Dell PowerVault MD3200 Series 18 ページ。 Storage arrays
Dell PowerVault MD3200 Series にも：更新マニュアル (32 ページ), ラック取り付け説明書 (2 ページ), サポート・マトリックス (12 ページ), 配備マニュアル (38 ページ), 情報更新 (1 ページ), サポート・マトリックス (17 ページ), テクニカルマニュアルブック (40 ページ), ホワイトペーパー (22 ページ), 配備マニュアル (38 ページ), 配備マニュアル (38 ページ)

Installing and Uninstalling the SMI-S

Provider

The system requirements to install and run the SMI-S Provider include:

•

Memory requirements—1 GB minimum (2 GB preferred).

•

Connectivity requirements—Ethernet with 100BASE-T minimum

(Gigabit Ethernet preferred), TCP/IP.

•

Port requirements—TCP port 5988 or TCP port 5989, or any other

available port if these ports are not available.

•

Storage array password—The device credentials profile requires the storage

array password (SharedSecret) to modify operations. The SMI-S Provider

persistently tracks an instance of the SharedSecret per storage array.

The SMI-S Provider is packaged as an installation executable file. To install

the SMI-S Provider:

1 Move the SMI-S Provider installation executable file on the server where

you want to install the SMI-S Provider and double-click the installation

executable icon and follow the instructions on the screen.

During installation, ArrayHosts.txt file opens.

2 Enter the HostName (s) or IP Address (s) of the MD storage array(s) to be

managed by the host in ArrayHosts.txt, save and close the file.

CAUTION:

Enter only one of the two management ports' IP addresses of each

array in this file. Do not enter the IP addresses of both management ports.

3 Click Finish.

The SMI-S Provider is installed on your system. After installation, you can

delete the installation executable file.