- ページ 35

ストレージ Dell PowerVault MD3220 SeriesのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Dell PowerVault MD3220 Series 46 ページ。 Storage arrays
Dell PowerVault MD3220 Series にも：更新マニュアル (32 ページ), ラック取り付け説明書 (2 ページ), 配備マニュアル (38 ページ), 情報更新 (1 ページ), テクニカルマニュアルブック (40 ページ), 配備マニュアル (38 ページ), 配備マニュアル (38 ページ)

Figure 24. Virtual Disk Copy Target Selection

After the virtual disk copy is established, it may be managed from the Virtual

Disk Copy tab. To stop a copy operation that is occurring, select the copy set

to modify, and click the Stop link from the Commands box. To recopy an

existing virtual disk copy, click the copy set, and click the Recopy link. To

delete a copy set, select the copy set to modify, and click the Remove Copy

link. This action removes the Virtual Disk Copy relationship between the two

virtual disks, but does not modify or delete the target virtual disk that will still

contain a copy of the original data from the source virtual disk.

Mapping a Virtual Disk

After creating new virtual disks, use the Mappings tab to present the virtual

disks to the ESX host for use. See Figure 25. From this view, you can manage

hosts, host groups, and virtual disk mappings. To present a new virtual disk to

an ESX host, click the Add Mapping link to start the Add Mapping wizard.

Dell MD Storage Array vCenter Plug-in