- ページ 13
ストレージ Dell PowerVault MD3220i SeriesのPDF テクニカルマニュアルブックをオンラインで閲覧またはダウンロードできます。Dell PowerVault MD3220i Series 38 ページ。 Storage arrays
Dell PowerVault MD3220i Series にも： 配備マニュアル (41 ページ), 更新マニュアル (32 ページ), ラック取り付け説明書 (2 ページ), インストレーション・マニュアル (18 ページ), 情報更新 (1 ページ), マニュアル (16 ページ)
ページを印刷する
DELL PowerVault MD3200i/MD3220i Technical Guide Book
MD3200i and MD3220i Front Panel Feature Description
Table 3.
FRONT PANEL / BEZEL INDICATOR AND FETAURE DESCRIPTION
Item
Indicator, Button, or
Connector
1
Enclosure status LED
2
Power LED
3
Not Applicable
4
System Identification
Button
Hard Drives
5
Not Applicable
6
Icon
The enclosure status LED lights when the enclosure
power is on.
Lights blue during normal operation and when the
management software is identifying the enclosure.
Blinks blue when the management software is identifying
the enclosure or when the system identification button is
pressed.
Lights amber when the enclosure is turned on or is reset.
Blinks amber when the enclosure is in the fault state.
The power LED lights when at least one power supply is
supplying power to the enclosure.
This LED has no use in the MD3200i or MD3220i.
The system identification button on the front control
panel can be used to locate a particular enclosure within
a rack. When the button is pushed, the system status
indicators on the control panel and the RAID controllers
blinks blue until the button is pushed again.
MD3200i—Up to 12 SAS hot-swappable drives.
MD3220i—Up to 24 2.5-inch SAS hot-swappable drives.
This switch has no use on the MD3200i or MD3220i.
Description
11