- ページ 26

ストレージ Dell PowerVault MD3820f seriesのPDF 配備マニュアルをオンラインで閲覧またはダウンロードできます。Dell PowerVault MD3820f series 34 ページ。 Storage arrays
Dell PowerVault MD3820f series にも: スタートマニュアル (8 ページ), オーナーズマニュアル (47 ページ)

Dell PowerVault MD3820f series 配備マニュアル
4.
If the array still shows an Unresponsive status, contact Dell.

Initial Setup Tasks

Enter the context of your task here (optional). This is where introductory content goes.
1.
The name of the first storage array found is displayed in the Devices tab of the EMW. To see a list of
all storage arrays found on the local network, expand the discovered storage arrays tab in the Device
pane of the EMW.
2.
The default name for a newly installed MDxxxxx series storage array is Unnamed. If another name is
displayed in MDSM, click the down arrow next to the name and click Unnamed in the drop-down list.
3.
Double-click on the discovered array to launch the array management window and edit the
configuration of the array.
4.
Click Perform Initial Setup Tasks to see an outline and links to the remaining postinstallation tasks.
The array is now ready to be configured.
See the Owner's Manual for information about each task and to perform the necessary configuration
steps.
The following table lists the recommended configuration steps that can be accomplished using the
Owner's Manual.
NOTE: Before configuring the storage array, check the status icons on the Device pane to ensure
that the enclosures in the storage array are in an Optimal status. For more information on the status
icons, see the Owner's Manual at support.dell.com/manuals.
Table 1. Initial Setup Tasks Dialog Box
Task
Rename the storage array
Set a storage array password
Set up alert notifications
Set up email alerts
Set up SNMP alerts
Configure a storage array
26
Purpose
To provide a more meaningful name than the
software-assigned label, Unnamed.
To restrict unauthorized access. MDSM may ask for
a password before changing the configuration or
performing a destructive operation
To notify individuals (by email) and/or storage
enterprise management consoles, such as Dell
Management Console, (by SNMP) when a storage
array component degrades or fails, or an adverse
environmental condition occurs.
To create virtual disks and map them to hosts.