- ページ 44
ストレージ Dell PowerVault MD3860i SeriesのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Dell PowerVault MD3860i Series 50 ページ。 Storage arrays
ページを印刷する
Troubleshooting A Wet Storage Array
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
1.
Turn off the array and disconnect all the cables.
2.
Remove the following components from the array:
•
Physical disks
•
RAID controller modules
•
Power supply modules
•
Cooling fan modules
3.
Let the system dry thoroughly for at least 24 hours.
4.
Reinstall the components you removed in step 2.
5.
Connect all the cables and turn on the array.
Troubleshooting A Damaged Array
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
1.
Ensure that the following components are properly installed:
•
Physical disks
•
RAID controller modules
•
Power supply modules
•
Cooling fan module
2.
Ensure that all the cables are properly connected and that there are no damaged pins in the
connectors.
3.
Run the diagnostics available in Dell PowerVault Modular Disk (MD) Storage Manager.
4.
In the AMW, select a component in the Hardware pane of the Hardware tab.
5.
Select Hardware → RAID Controller Module → Advanced → Run Diagnostics → RAID Controller
Module.
Controller Failure Conditions
Certain events can cause a RAID controller module to fail and/or shut down. Unrecoverable ECC
memory or PCI errors, or critical physical conditions can cause lockdown. If your RAID storage array is
configured for redundant access and cache mirroring, the surviving controller can normally recover
without data loss or shutdown.
44