- ページ 16

ストレージ Dell PS4100のPDF ハードウェア・メンテナンス・マニュアルをオンラインで閲覧またはダウンロードできます。Dell PS4100 47 ページ。 Storage array
Dell PS4100 にも：ハードウェアマニュアル (50 ページ), 概要 (7 ページ), インストールとセットアップマニュアル (41 ページ), セッティング (2 ページ)

PS4100 Hardware Maintenance Guide

• There is a two-minute delay between the time you insert a drive and the time the drive is automatically

configured into a RAID set. This time interval allows multiple drives to be simultaneously configured

in an array, which is more efficient than installing a single drive, configuring it, and then repeating the

process. For example, when you install a drive, the timer starts. If no other drives are installed, the drive

is configured after a delay of two minutes. If you install another drive before two minutes have elapsed,

the timer is restarted.

• If you install a drive during RAID reconstruction or verification, the new drive will not be configured

until the operation completes.

Removing a 2.5-inch Drive

1. Remove the bezel. See

2. Press the release button (callout 1 in

from the array (callout 2).

3. Pull the drive out by the handle until it is free of the drive bay (callout 3).

Removing the Bezel on page

Figure

8). The drive latch opens and the drive emerges partway

Maintaining Drives