- ページ 23

ストレージ Dell SD630-SのPDF 配備マニュアルをオンラインで閲覧またはダウンロードできます。Dell SD630-S 31 ページ。 Designed for scality ring

Figure 13. Connecting a Dell SD7000-S Dual Node server to network (Physical Servers)

Network connections for the Dell SD7000-S Dual Node server are shown for the Sled B (top Physical

Server). Configure Sled A (lower Physical Server) identically to the Sled B.

NOTE: The Dell SD7000-S Single Node server consists only Sled A.

A dummy sled is installed in place of Sled B.

Table 8. Connections for a Dell SD7000-S Dual Node server

Designator

Connecting servers to electrical outlets

To ensure that each Dell SD7000-S Physical Server has a redundant power source, connect the power

cables from each Physical Server to separate power sources such as an uninterruptible power supply

(UPS) or a power distribution unit (PDU).

Network port

Ethernet connector 1, Integrated

Network port

Ethernet connector 3, Integrated

Network port

PCI expansion card, Slot 2, dual

Ethernet NIC, Port 0

PCI expansion card, Slot 2, dual

Ethernet NIC, Port 1

Network

Management

Storage

Management