- ページ 11
ストレージ Dell Storage Center SCv2020のPDF スタートマニュアルをオンラインで閲覧またはダウンロードできます。Dell Storage Center SCv2020 20 ページ。 Storage center
Dell Storage Center SCv2020 にも： オーナーズマニュアル (42 ページ), スタートマニュアル (19 ページ)
ページを印刷する
3.
Connect fault domain 2 to switch 2.
a. Connect a cable from storage controller 1: port 2 to switch 2.
b. Connect a cable from storage controller 2: port 2 to switch 2.
c. (Four-port I/O card only) Connect a cable from storage controller 1: port 4 to switch 2.
d. (Four-port I/O card only) Connect a cable from storage controller 2: port 4 to switch 2.
Figure 5. Storage System Connected to Switches and Host Servers
1.
Server 1
3.
Switch 1
5.
SCv2000/SCv2020 storage system
7.
Storage controller 2
Cabling Direct-Attached Host Servers
An SCv2000/SCv2020 storage system with SAS front-end ports connects directly to host servers.
NOTE: The top storage controller is storage controller 1 and the front-end ports are numbered left
to right. The bottom storage controller is storage controller 2 and the front-end ports are numbered
right to left.
1.
Connect fault domain 1 to host server 1.
a. Connect a SAS cable from storage controller 1: port 1 to server 1.
b. Connect a SAS cable from storage controller 2: port 1 to server 1.
2.
Connect fault domain 2 to host server 2.
a. Connect a SAS cable from storage controller 1: port 2 to server 2.
b. Connect a SAS cable from storage controller 2: port 2 to server 2.
3.
Connect fault domain 3 to host server 3.
a. Connect a SAS cable from storage controller 1: port 3 to server 3.
b. Connect a SAS cable from storage controller 2: port 3 to server 3.
4.
Connect fault domain 4 to host server 4.
2.
Server 2
4.
Switch 2
6.
Storage controller 1
11