- ページ 38
スイッチ Dell 5500 SeriesのPDF セットアップおよび仕様マニュアルをオンラインで閲覧またはダウンロードできます。Dell 5500 Series 40 ページ。 Dell networking 5500 gigabit ethernet switches
Dell 5500 Series にも： 仕様 (2 ページ), クイック・スタート・マニュアル (18 ページ)
ページを印刷する
Figure 1. DOS BIOS Update Screen
System and setup password
Table 37. System and setup password
Password type
System password
Setup password
You can create a system password and a setup password to secure your computer.
CAUTION:
The password features provide a basic level of security for the data on your computer.
CAUTION:
Anyone can access the data stored on your computer if it is not locked and left unattended.
NOTE:
System and setup password feature is disabled.
Assigning a system setup password
You can assign a new System or Admin Password only when the status is in Not Set.
To enter the system setup, press F2 immediately after a power-on or re-boot.
1. In the System BIOS or System Setup screen, select Security and press Enter.
The Security screen is displayed.
2. Select System/Admin Password and create a password in the Enter the new password field.
Use the following guidelines to assign the system password:
•
A password can have up to 32 characters.
•
The password can contain the numbers 0 through 9.
•
Only lower case letters are valid, upper case letters are not allowed.
•
Only the following special characters are allowed: space, ("), (+), (,), (-), (.), (/), (;), ([), (\), (]), (`).
3. Type the system password that you entered earlier in the Confirm new password field and click OK.
4. Press Esc and a message prompts you to save the changes.
5. Press Y to save the changes.
38
System setup
Description
Password that you must enter to log on to your system.
Password that you must enter to access and make changes to the
BIOS settings of your computer.