- ページ 19
スイッチ Dell D18MのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Dell D18M 45 ページ。 Remote power switch
Dell D18M にも： セットアップと仕様 (39 ページ), セットアップおよび仕様マニュアル (39 ページ), インストレーション・マニュアル (11 ページ)
ページを印刷する
Removing the coin cell battery
1
Follow the procedure in
2
Remove the:
•
cover
•
bezel
3
Open the
front bezel
4
To remove the coin cell battery:
a
Using a plastic scribe, release the coin cell battery until it pops out.
b Remove the coin cell battery from the connector on the system board.
Installing the coin cell battery
1
Hold the coin cell battery with the "+" sign facing up and slide it under the securing tabs at the positive side of the
connector.
2
Press the battery into the connector until it locks into place.
3
Close the front bezel door.
4
Install the:
•
bezel
•
cover
5
Follow the procedure in
Removing the heat sink assembly
1
Follow the procedure in
2
Remove the:
•
cover
•
bezel
3
Open the
front bezel
4
To remove the heat sink assembly:
a
Disconnect the heat sink assembly cable from the connector on the system board [1].
b Loosen the captive screws that secure the heat sink assembly to the system board [2, 3, 4, 5].
c Lift the heat sink assembly away from the computer [6].
Before Working Inside Your
door.
After Working Inside Your
Before Working Inside Your
door.
Computer.
Computer.
Computer.
Removing and installing components
19