- ページ 13

スイッチ Dell DF10MXLのPDF スタートマニュアルをオンラインで閲覧またはダウンロードできます。Dell DF10MXL 36 ページ。 Networking mxl 10/ 40gbe switch io module

USB Ports

Figure 1-4. USB Ports on Front Panel

USB Storage Port

USB Console Port

To configure the switch through an RS-232 serial interface, use the lower USB

console port (Figure 1-4). This port provides a direct connection to the switch

and allows you to access the command line interface (CLI) from a console

terminal connected to the port through the provided serial cable (with USB

type-A to female DB-9 connectors).

The console port supports asynchronous data of eight data bits, one stop bit,

no parity bit, and no flow control. The default baud rate is 9600 bps.

The upper USB port functions as an external flash drive that you can use to

store configuration files and scripts.

Hardware Overview