- ページ 28

スイッチ Dell DF10MXLのPDF スタートマニュアルをオンラインで閲覧またはダウンロードできます。Dell DF10MXL 36 ページ。 Networking mxl 10/ 40gbe switch io module

The switch with the highest priority number is elected Master. The switch with the

next highest priority number is elected Standby Master and takes over stack

management if the Master Switch fails. For example:

Dell> enable

Dell# configure

Dell(conf)# stack-unit 0 priority 14

The no form of the stack-unit

management priority of a stack unit to the default value of 0.

Managing a Stack

You can manage a stack of MXL 10/40GbE Switches as a single entity when

connected together. Manage the stack from the CLI through the serial

console connection or a remote Telnet session over the OOB management IP

address.

When you create a stack is created, one switch automatically becomes the

Master Switch and another switch is elected Standby Master. The Master

Switch maintains stack operation with minimal impact in the event of:

•

Switch failure

•

Inter-switch stacking link failure

•

Switch insertion

•

Switch removal

If the Master Switch goes off line, the Standby Master replaces it as the new

master and the switch with the next highest MAC address or priority becomes

Standby Master.

Topology Discovery

When a stack is formed, a topology discovery process builds up a database

that contains information about all of the switches in the stack, including the

Dell Networking OS version, hardware version, management priority, and

switch MAC address. To view this information, use the show system

command.

Assembling a Switch Stack

unit-number

number

priority

command reverts the