- ページ 8

スイッチ Dell EMC Edge 510 LTEのPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。Dell EMC Edge 510 LTE 24 ページ。 Networking switch
Dell EMC Edge 510 LTE にも：セットアップマニュアル (8 ページ)

ページを印刷する

1. Sim Card

The Edge 510 LTE platform connects the service provider edge or small-to-medium branch locations.

Use the platform on a desktop or optionally install the platform in a wall or rack.

NOTE:

If you optionally install the platform into a rack or cabinet, install the platform first, and then install any additional

components such as cables or optics.

Topics:

•

Site selection

•

Platform mounting

•

Fans and airflow

•

Power connection

•

Storing components

Site selection

Ensure that the area where you install your platform meets the following safety requirements:

● Near an adequate power source

● Connected to a properly grounded power outlet

WARNING:

Earth the Edge 510 LTE. Connect the Edge 510 LTE to an outlet that is a properly wired, earth-

ground socket outlet.

● Environmental—platform location—continuous temperature range is 0°C to 40°C (32°F to 104°F)

● Operating humidity:

○ 5% to 85% (RH), noncondensing continuously

○ 5% to 90% (RH), noncondensing Short term (< 1% of operational hour per year)

● In a dry, clean, well-ventilated, and temperature-controlled room, away from heat sources such as hot air vents or direct

sunlight

● Away from sources of severe electromagnetic noise

For more information about platform storage and environment temperatures, see Specifications.

Platform mounting

The Edge 510 LTE supports the following mounting options:

● Desktop placement using rubber feet

● Wall-mounting using wall mount brackets

● Rack-mounting using the optional rackmount tray

Rack and platform ground

Ensure that you install in the platform in a grounded rack. Ground the rack to the same ground point the power service in your

area uses. The ground path must be permanent.

Site preparations