- ページ 20

スイッチ Dell Force10 S60 SeriesのPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Dell Force10 S60 Series 29 ページ。
Dell Force10 S60 Series にも：マニュアル (45 ページ)

Serial Console

The RS-232 console port is labeled on the chassis. It is in the upper right-hand

side, as you face the rear of the chassis.

S55

RJ-45

Console Port

Step

Task

Install an RJ-45 copper cable into the console port.Use a rollover (crossover)

cable to connect the S55 or S60 console port to a terminal server.

Connect the other end of the cable to the DTE terminal server.

Terminal settings on the console port cannot be changed in the software and are

set as follows:

9600 baud rate

No parity

8 data bits

1 stop bit

No flow control

Accessing the RJ-45 console port with a DB-9 adapter

You can connect to the console using an RJ-45 to RJ-45 rollover cable and an

RJ-45 to DB-9 female DTE adapter to a terminal server (for example, PC).

Table 2-1 lists the pin assignments.

Table 2-1. Pin Assignments Between the Console and a DTE Terminal Server

S55/S60

RJ-45 to RJ-45 Rollover Cable RJ-45 to DB-9

Console Port

Signal

RJ-45 pinout

RTS

Installing the Software

S60

RJ-45 Pinout

Console

Port

Terminal

Adapter

Server Device

DB-9 Pin

Signal

CTS