- ページ 20
スイッチ Dell Networking N2024のPDF ファームウェアのアップグレードをオンラインで閲覧またはダウンロードできます。Dell Networking N2024 21 ページ。
Dell Networking N2024 にも： インストレーション・マニュアル (49 ページ)
ページを印刷する
Upgrade Procedure Dell™ Networking
N2024/N2024P/N2048/N2048P/N3024/N3024F/N3024P/N3048/N3048P
Switches
Loading Operational Code...done.
Decompressing Operational Code...done.
Uncompressing apps.lzma
SyncDB Running...
DMA pool size: 16777216
<188> Feb 21 03:18:06 0.0.0.0-1 General[90498940]: procmgr.c(2926) 1 %% Application
Terminated (user.start, ID = 7, PID = 579
AXI unit 0: Dev 0xb340, Rev 0x01, Chip BCM56340_A0, Driver BCM56340_A0
SOC unit 0 attached to PCI device BCM56340_A0
<186> Feb 21 05:28:11 0.0.0.0-1 General[90205492]: bootos.c(179) 7 %% Event(0xaaaaaaaa)
started!
(Unit 1 - Waiting to select management unit)>
Applying Global configuration, please wait ...
Applying Interface configuration, please wait ...
console>
5.
Verify that the 6.0.1.3 version of firmware is loaded on the switch. The switch or stack is now ready for
normal operation. Verify the configuration and make any changes needed prior to connecting the switch to
the operational network.
console#show version
Machine Description............... Dell Networking Switch
System Model ID................... N3048
Machine Type...................... Dell Networking N3048
Serial Number..................... CN0H784T282983AR0013A00
Manufacturer...................... 0xbc00
Burned In MAC Address............. F8B1.561A.60E3
System Object ID.................. 1.3.6.1.4.1.674.10895.3058
SOC Version....................... BCM56340_A0
HW Version........................ 3
CPLD Version...................... 13
unit active
---- ----------- ----------- -------------- --------------
1
6.0.1.3
6.
Update Boot Code using the hidden CLI command "update bootcode" from CLI.
console#update bootcode
Are you sure you would like to update the bootcode? (y/n) y
7.
Reload the switch for boot code update to take effect.
console#reload
Management switch has unsaved changes.
Are you sure you want to continue? (y/n) y
Configuration Not Saved!
Are you sure you want to reload the stack? (y/n) y
backup
current-active next-active
6.0.0.7
6.0.1.3
Page 17
6.0.1.3