- ページ 11
スイッチ Dell Networking N2048PのPDF ファームウェアのアップグレードをオンラインで閲覧またはダウンロードできます。Dell Networking N2048P 21 ページ。
Dell Networking N2048P にも： インストレーション・マニュアル (49 ページ)
ページを印刷する
Upgrade Procedure Dell™ Networking
N2024/N2024P/N2048/N2048P/N3024/N3024F/N3024P/N3048/N3048P
Switches
Select startup option within 3 seconds, else Operational Code will start automatically...
Operational Code Startup -- Main Menu
1 - Start Operational Code
2 - Display Boot Menu
Select (1, 2)#
Extracting Operational Code from .stk file...done.
Loading Operational Code...done.
Decompressing Operational Code...done.
Uncompressing apps.lzma
SyncDB Running...
DMA pool size: 16777216
<188> Feb 21 03:18:06 0.0.0.0-1 General[90498940]: procmgr.c(2926) 1 %% Application
Terminated (user.start, ID = 7, PID = 579
AXI unit 0: Dev 0xb340, Rev 0x01, Chip BCM56340_A0, Driver BCM56340_A0
SOC unit 0 attached to PCI device BCM56340_A0
<186> Feb 21 03:18:11 0.0.0.0-1 General[90205492]: bootos.c(179) 7 %% Event(0xaaaaaaaa)
started!
(Unit 1 - Waiting to select management unit)>
Applying Global configuration, please wait ...
Applying Interface configuration, please wait ...
console>
6.
After the switch has finished rebooting, log in and verify that the firmware has been updated to the
version using the show version command. A single switch will typically reboot in around two minutes. A
stack may take significantly longer to complete the upgrade process.
console#show version
Machine Description............... Dell Networking Switch
System Model ID................... N3048
Machine Type...................... Dell Networking N3048
Serial Number..................... CN0H784T282983AR0013A00
Manufacturer...................... 0xbc00
Burned In MAC Address............. F8B1.561A.60E3
System Object ID.................. 1.3.6.1.4.1.674.10895.3058
SOC Version....................... BCM56340_A0
HW Version........................ 3
CPLD Version...................... 13
unit
active
----- ------------ ------------ ----------------- -----------------
1
6.0.1.3
7.
The switch or stack is now ready for normal operation. Verify the configuration and make any changes
needed prior to connecting the switch to the operational network.
8.
Update Boot Code using the hidden CLI command "update bootcode"
console#update bootcode
Are you sure you would like to update the bootcode? (y/n) y
Issuing boot code update command...
Boot code update command issued.
9.
Reload the switch.
console#reload
Management switch has unsaved changes.
Are you sure you want to continue? (y/n) y
backup
current-active
6.0.0.7
6.0.1.3
Page 8
next-active
6.0.1.3
6.0.1.3