- ページ 19

スイッチ Dell Networking S4048のPDF スタートマニュアルをオンラインで閲覧またはダウンロードできます。Dell Networking S4048 24 ページ。
Dell Networking S4048 にも：インストレーション・マニュアル (44 ページ)

Configuring a Host Name

The host name appears in the prompt. The default host name is Dell.

Host names must start with a letter, end with a letter or digit, and must have characters, letters, digits, and

hyphens in the string.

•

Create a new host name.

CONFIGURATION mode

hostname name

You can configure the S4048–ON system to be accessed remotely by Telnet.

The system has a dedicated management port and a management routing table that is separate from the

IP routing table.

Configure an IP address for the management port

Configure a management route with a default gateway

Configure a username and password

Configuring the Management Port IP Address

In order to access the system remotely, assign IP addresses to the management ports.

Enter INTERFACE mode for the Management port.

CONFIGURATION mode

interface ManagementEthernet slot/port

Assign an IP address to the interface.

INTERFACE mode

ip address ip-address/mask

Enable the interface.

INTERFACE mode

no shutdown

Configuring the Management Route

Define a path from the S4048–ON to the network from which you are accessing the S4048–ON

remotely.

Management routes are separate from IP routes and are used to manage the S4048–ON through the

management port.

•

Configure a management route to the network from which you are accessing the system.

CONFIGURATION mode

management route ip-address/mask gateway

Dell Networking OS

(Configuring the Management Port IP

(Configuring the Management

(Configuring the Username and

Address).

Route).

Password).