- ページ 21

スイッチ Dell Networking S4048のPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。Dell Networking S4048 44 ページ。
Dell Networking S4048 にも：スタートマニュアル (24 ページ)

Figure 9. Four-post threaded configuration

For each rail, attach the front and rear flanges to the post flanges with two user-supplied screws at each end, item 2.

S4048-ON installation

You can mount the system in the 1U front-rack or 1U flush and center two-post configurations. The following is an example of a front-rack

configuration:

For the 1U flush and center two-post configurations, slide the system into the rails in the same manner as the four-post configurations.

You must configure the rails that are attached to the system.

Attach the inner chassis members switch rails to the S4048–ON system.

Item 3 shows the detail for the front standoff with the locking tab.

S4048–ON installation