- ページ 4

スイッチ Dell PowerConnect 5224のPDF マニュアルをオンラインで閲覧またはダウンロードできます。Dell PowerConnect 5224 42 ページ。 Powerconnect 3248; powerconnect 5224
Dell PowerConnect 5224 にも：特徴一覧 (2 ページ), 仕様 (2 ページ)

ページを印刷する

Addendum to the 32 48 and 5 224 User 's Guides

System Logs

Remote system logging allows you to configure the logging of system

messages directly from the Web interface and the command line interface

(CLI).

The system log messages are categorized, by severity, into eight levels. The

levels range from 0 for Emergencies to 7 for Debugging. See the following

table for descriptions:

Level Argument

Emergencies

Alerts

Critical

Errors

Warnings

Notifications

Informational

Debugging

The system allows you to specify which levels are logged to RAM or flash

memory.

To assist in troubleshooting network problems, severe error messages that

are logged to flash memory are permanently stored in the switch. Up to 4 K

log entries can be stored in the flash memory. When the available memory

for logs exceeds 256 KB, the oldest entries are overwritten.

System Logs Configuration

The Switch/General/System Logs page allows you to configure and limit

system messages that are logged to flash or RAM memory. The default is set

for levels 0 to 3 to be logged to flash and levels 0 to 7 to be logged to RAM.

The Switch/General/System Logs page contains the following fields that

can be edited:

•

System Log Status — Enables/disables the logging of debug or error

messages to the logging process.

Level

Description

System unusable

Immediate action needed

Critical conditions

Error conditions

Warning conditions

Normal but significant condition

Informational messages only

Debugging messages