- ページ 9

スイッチ Dell PowerConnect M8428-kのPDF マニュアルをオンラインで閲覧またはダウンロードできます。Dell PowerConnect M8428-k 25 ページ。 Dell poweredge m710 and m710hd - system memory update
Dell PowerConnect M8428-k にも：更新マニュアル (32 ページ), リリースノート (27 ページ), ユーザーマニュアル (23 ページ), 更新マニュアル (1 ページ)

ページを印刷する

Rev 1.00

Connecting to the 10GbE PTM CLI

If you are connecting to the system over a network, you will need an SSH client that supports

ZModem file transfer. The examples in this document use Secure CommNet v2.35 (download

from www.radient.com). After you download the software, some initial configuration is necessary.

Please follow the next configuration steps; when using a different client software, similar settings

should be available.

If you are connecting directly to the serial port of the Chassis Management Console (CMC), skip

to step (9).

1. Go to Setup => SSH2 settings, and set the compression to

none

Figure 4: Setup > SSH2 Settings

Figure 5: Set Compression to "none"

2. Go to Setup => Terminal Settings