- ページ 3

ヒーティング・パッド Earthlite DLXのPDF マニュアルをオンラインで閲覧またはダウンロードできます。Earthlite DLX 4 ページ。 Digital table warmer

ページを印刷する
Operations & Controls
Note: When warmer is plugged in, the control will
automatically turn on with a default temperature of 1150F
with a 3 hour timer.
Power Button:
•
Press & hold for 2 seconds to power on or off
Red/Blue Buttons:
•
Press & hold to increase/decrease temperature
+/- Buttons:
•
Press to increase/decrease timer by 30 minute
increments
•
Timer range is 0-10 hours
Dimmer Feature
•
WIthout any operation for 1 minute, the remote
brightness will dim. Press any button to wake up the
system and return the display to normal brightness.
User Set Countdown Timer Feature
•
Automatically shuts the warmer off when the timer
reaches 0:00:00.
Troubleshooting
HOW TO TEST THE WARMER
The only effective way to test the warmer quickly is to roll up your DLX™ warmer, set it to high heat and wait 5
minutes. Place your hand in the center. If you feel heat, it's working.
MY WARMER WILL NOT HEAT UP
The pad provides warmth within 5 minutes of a client laying on it. Adding a blanket will help insulate and retain
the heat between services. The pad itself is not designed to retain the heat.
MY WARMER IS NOT GETTING HOT ENOUGH
The DLX™ warmer is designed to provide plenty of heat, but only when a client or blanket is laying on it will it
retain the heat.
MY WARMER SHUTS DOWN
The DLX™ table warmer controller includes a user set countdown timer feature, which automatically shuts the
warmer off when it reaches 0:00:00. Make sure this feature is set to a desired time.
MY WARMER WON'T TURN ON
If the display no longer turns on, the DLX™ warming pad could be plugged into a faulty outlet, or the overheat
safety circuit could have been activated. Make sure the pad is plugged into a tested outlet, and if the display is
still not working, the pad needs to be replaced or returned.
Current
Temperature
Timer Setting
Increase
Temperature
Increase Timer
Decrease
Temperature
Decrease Timer