- ページ 7
エクステンダー Entec HDBT100PLのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Entec HDBT100PL 16 ページ。 Hdmi/ir/rs232 twisted pair poc extender
ページを印刷する2.2 Product Appearance of HDMI Pro Receiver
No.
Name
On
Link
①
Out
Power
②
ETHERNET
③
HDBT IN
④
HDMI OUT
⑤
IR IN&OUT
⑥
RS232
⑦
DC 24V
HDMI/IR/RS232 Twisted Pair PoC Extender
Transmitter or HDMI Pro Receiver connecting with power
adapter is enough.)
Figure 2 Interfaces of HDMI Pro Receiver
On: Used to show the working status, blinks when in
normal working state, turns off when stop working.
Link: Twisted Pair Link status indicator. It will keep on when
connection is successful.
Out: When connected with device which supports HDCP
and works normally, this LED will keep on. If the transmitted
signal does not support HDCP, the LED will blink.
Power: Turn red and keep on when power on.
Ethenet ports, connect with a router, to work as exchanger
along with the ETHERNET port of HDMI Pro Transmitter. If
they are well connected, the yellow LED indicators on the
corresponding ports will keep on and the green ones will blink
when working.
To connect with the HDBT OUT port of HDMI Pro Transmitter
by using a single CAT5e cable (90m length in max).
HDMI output port, connect with an HDMI displaying device.
IN: Connect with IR receiver, receive IR signals and send
them via cable to the other end of the cable, for example
the IR OUT port of HDMI Pro Transmitter.
OUT: Connect with IR Emitter, transmit IR signals sent via
cable.
Serial port, 3-pin captive screw connector, connects with the
control terminal to control the controlled terminal, supports bi-
directional RS232 control between the transmitter (HDMI Pro
Transmitter) and the receiver (HDMI Pro Receiver).
Connect with a DC 24V power adapter. (Either HDMI Pro
Transmitter or HDMI Pro Receiver connecting with power
adapter is enough.)
Description
3