- ページ 20

スイッチ Dell PowerEdge M600のPDF 使用マニュアルをオンラインで閲覧またはダウンロードできます。Dell PowerEdge M600 44 ページ。 Using dell blade servers in a dell poweredge high availability cluster
Dell PowerEdge M600 にも：更新マニュアル (44 ページ), 更新マニュアル (21 ページ), 更新マニュアル (14 ページ), インストレーション・マニュアル (7 ページ)

ページを印刷する

Cluster Nodes

Table 1-4 lists the hardware requirements for the server modules in the

PowerEdge server enclosure.

Table 1-4. Cluster Node Requirements

Component

Cluster nodes

RAM

Fibre Channel

mezzanine card

iSCSI mezzanine

card

Gigabit Ethernet

(cluster networks)

RAID controller

(optional)

Introduction

Minimum Requirement

Two to eight PowerEdge server modules running the appropriate

Windows Server 2003 operating system edition as described in

Table 1-1

At least 512 MB of RAM installed per server module

If the cluster is configured with a Fibre Channel shared storage

system, at least one dual-port Fibre Channel mezzanine card per

server module

If the cluster is configured with an iSCSI shared storage system,

at least one dual-port Gigabit Ethernet mezzanine card per

server module

At least two Gigabit Ethernet interfaces per server module

One controller connected to two internal hard drives for each

server module in a RAID 1 configuration

NOTE:

It is strongly recommended that you use hardware-based

RAID or software-based disk-fault tolerance for the internal drives.