- ページ 40

スイッチ Dell PowerVault 56FのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Dell PowerVault 56F 42 ページ。 Dell powervault 56f switches rack installation guide
Dell PowerVault 56F にも：ユーザーマニュアル (6 ページ), 接続マニュアル (38 ページ), インストールマニュアル (8 ページ), ラック設置マニュアル (28 ページ)

2-30 Dell PowerVault Switch Manager User's Guide

System Description

field

System Contact field

System Location field

Event Trap Level (0–5)

Enable Authentica-

tion Traps

Read Write

Read Only

Community String

Trap Recipients

Commit SNMP

Changes

Reset

NOTE: To disable community string or trap recipient fields, leave them empty.

To access Telnet, click telnet on the Switch Management Application. This brings

up a Telnet session directly from your Web browser. Because only one Telnet session

can be active, a message appears if a session is already active. Click Abort Session

to terminate the existing Telnet session or click Cancel to cancel the transaction.

NOTE: You must have admin privilege to abort a Telnet session.

Displays or sets the system description; the default is

Fibre Channel Switch

Displays or sets the contact information for the switch;

the default is Component Support

Displays or sets the location of the switch; the default is

End User Premise

Sets the severity level of switch events that prompt

SNMP traps; the default is 0

Check to enable authentication traps; uncheck to dis-

able (Dell recommends disabling)

Displays or sets up to three strings that work with the

SNMP set command

Displays or sets up to three strings that work with the

SNMP get or get-next command

Displays the name of the community string.

Displays or sets the recipients for traps (usually the IP

address of the SNMP management station)

Click to apply the changes you made

Click to reset all components to the values set when

you launched SNMP Admin