- ページ 11
スイッチ Dell R1-2401のPDF スタートマニュアルをオンラインで閲覧またはダウンロードできます。Dell R1-2401 30 ページ。 Poweredge vrtx switch modules
Dell R1-2401 にも： スタートマニュアル (20 ページ)
ページを印刷する
- 1. Getting Started Guide
- 1. 1 Hardware and Initial Configuration
- 1. Switch Hardware
- 1. Initial Configuration of the Switch
- 2. Table of Contents
- 2. 2 Using the CLI
- 2. CLI Command Conventions
- 2. Accessing the Device through the CLI
- 2. Retrieving an IP Address
- 2. Security Management and Password Configuration
- 2. Configuring Login Banners
- 2. Startup Menu Procedures
- 2. Software Download
Using the CLI
This section describes how to perform various configuration operations
through the Command Line Interface CLI.
It includes the following topics:
•
Using the CLI
•
Accessing the Device Through the CLI
•
Retrieving an IP Address
•
Security Management and Password Configuration
•
Configuring Login Banners
•
Startup Menu Procedures
•
Software Download
Using the CLI
This section provides some general information for using the CLI.
For a complete description of CLI commands, refer to the
VRTX 1Gb Switch Module, R1-2401 CLI Reference Guide
Command Mode Overview
The CLI is divided into command modes, each with a specific command set.
Entering a question mark at the terminal prompt displays a list of commands
available for that particular command mode.
In each mode, a specific command is used to navigate from one mode to
another.
These modes are described below.
User EXEC Mode
During CLI session initialization, the CLI is in User EXEC mode. Only a
limited subset of commands is available in User EXEC mode. This level is
reserved for tasks that do not change the terminal configuration and is used
to access configuration sub-systems.
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 3 / 6 / 1 3 - F O R P R O O F O N LY
Template Last Updated - 2/7/2007
2
Dell PowerEdge
.
Using the CLI
11