- ページ 13

スイッチ Dell S4048-ONのPDF トラブルシューティングマニュアルをオンラインで閲覧またはダウンロードできます。Dell S4048-ON 29 ページ。 Enterprise switches
Dell S4048-ON にも：設定マニュアル (19 ページ), 設定マニュアル (30 ページ)

ページを印刷する

+ Checking Dev found @ 0x49 ...

+ Checking Dev found @ 0x4a ...

+ Checking Dev found @ 0x4c ...

+ Checking Dev found @ 0x4d ...

Checking I2C devices on bus 2:

I2C Devices: Overall test results --------------------- >>> Passed

Testing Programmable Devices:

PL Tool test:

+ Checking

System CPLD

+ Checking

System CPLD

PL Tool: Overall test results ------------------------- >>> Passed

Power Supply Test all

Power Supply 1 ............................................ Passed

Power Supply 2 is not present

Power Supply Test ......................................... Passed

Testing Temp sensor

+ Checking [CPU sensor]

+ Checking [MAC sensor]

+ Checking [Phy Right sensor]

+ Checking [Phy Left sensor]

Temp Sensors: Overall test results -------------------- >>> Passed

Fan Controller Short Test ................................. Passed

Fan 1

speed is 12240 RPM

Fan 2

speed is 12240 RPM

Fan 3

speed is 12240 RPM

Fan 4

speed is 12240 RPM

Testing Memory Regions:

Testing Memory Region 0:

Address Read Test ......................................... Passed

Address Write Test ........................................ Passed

Address Walking 1's Test .................................. Passed

Address Walking 0's Test .................................. Passed

Data Read Test ............................................ Passed

Data Write Test ........................................... Passed

Data Walking 1's Test ..................................... Passed

Data Walking 0's Test ..................................... Passed

Data Sliding 1's Test ..................................... Passed

Data Sliding 0's Test ..................................... Passed

Data Pattern Test ......................................... Passed

Memory: Overall test results -------------------------- >>> Passed

EDA: Overall test results ----------------------------- >>> PASSED.

The EDA tool tests the platforms using the default_eda_script.cfg configuration file. This script dictates how EDA runs and which test runs

first or multiple times. Each line of the script is the actual prompt command line including parameters.

pcitool

The PCI tool (pcitool) allows testing of the PCI devices.

In EDA Quick Test mode, pcitool completes a simple check on the PCI bus. The tool scans the PCI bus for all drivers and functions and

writes the configuration registers to the configuration file.

Example of the pcitool Output

Syntax: ./pcitool <option>

show <bus# dev# func#> := show config data for a specific bus:dev.func

read <bus# dev# func# offset count> := read 8-bit config register for bus:dev.func

write <bus# dev# func# offset data> := write 8-bit config register for bus:dev.func

------

0xffdf0000 Reg: 0x10 .................... Passed

0xffdf0000 Reg: 0xa0 .................... Passed

devices:

= 31.0 C ....................... Passed

= 38.0 C ....................... Passed

= 40.0 C ....................... Passed

= 38.0 C ....................... Passed

-h := show this help

scan := scan all PCI devices

all := scan and show all config data

test := test using the default PCI test config file

------ 0x49

..... Passed

------ 0x4a

..... Passed

------ 0x4c

..... Passed

------ 0x4d

..... Passed

ONIE diagnostics