- ページ 25

スイッチ Dell S4100-ON SeriesのPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。Dell S4100-ON Series 47 ページ。
Dell S4100-ON Series にも：セットアップマニュアル (21 ページ), インストレーション・マニュアル (48 ページ), インストレーション・マニュアル (49 ページ)

Figure 13. Four-post threaded installation

For each rail, attach the front and back flanges to the post flanges with two user-supplied screws at each end.

S4100-ON Series installation

You can mount the switch in the 1U front-rack two-post, flush or center configuration, or a four-post configuration. The following is an

example of a front-rack configuration:

For the 1U two-post configurations, slide the switch into the rails in the same manner as the four-post configurations.

Configure the rails that are attached to the switch.

NOTE:

For more information, see the installation instruction labels on the rail.

Attach the inner switch rails to the S4100F–ON Series (S4128F-ON and S4148F-ON) switch.

Line up the rail with the mounting heads and attach the rail to the chassis. Slide the rail back until it locks into place. The following

shows the detail of the front standoff with the locking tab:

S4100–ON Series installation