- ページ 5

スイッチ Dell S4128-ONのPDF 設定マニュアルをオンラインで閲覧またはダウンロードできます。Dell S4128-ON 19 ページ。 Dell emc sc series sans

Introduction

This document illustrates how to configure Dell EMC™ Networking S4148-ON and S4128-ON switches for

use with Dell EMC SC Series storage using Dell EMC best practices.

The host servers and storage controllers can be connected to the switches using the QSFP+ and QSFP28

ports with appropriate breakout cables. The switches are interconnected to each other using 40GbE cables or

100GbE cables.

Optional steps are provided in section 3 to enable Data Center Bridging (DCB).

For more information on SC Series SAN design recommendations, see the Storage Center System Manager

Administrator's Guide and the Storage Center Deployment Guide at the

1.1

Table 1 lists the formatting conventions used in this document.

Format

Bold

Bold italic

<Italic> <brackets> Separate variables

1.2

This switch configuration guide describes an optimal configuration following Dell EMC best practices for a SC

Series iSCSI SAN and is intended for storage or network administrators and deployment personnel.

1.3

Table 2 provides an overview of the switch configuration.

Switch vendor

Switch model

Switch firmware

Note: For proper functionality, the switch must be at the switch firmware version shown in Table 2 before

proceeding with this configuration. Using previous firmware versions may have unpredictable results.

Note: The latest firmware updates and documentation can be found at Dell.com/support.

5 Dell EMC Networking S4148-ON and S4128-ON Switch Configuration Guide for Dell EMC SC Series SANs | SCG3704

Document conventions

Description

User input

User input (variable)

Switch specifications

Dell EMC Networking S4148-ON/S4128-ON

Dell EMC

S4148U-ON, S4148F-ON, S4148FE-ON, S4148T-ON, S4128F-

ON, and S4128T-ON

10.3.1 or later

Customer Portal

Example

OS# show version

OS# my password

(login required).