- ページ 2

電源 Allied Telesis AT-8948のPDF 設定方法をオンラインで閲覧またはダウンロードできます。Allied Telesis AT-8948 9 ページ。 At-8900 series
Allied Telesis AT-8948 にも： データシート (4 ページ), データシート (3 ページ), データシート (3 ページ), データシート (2 ページ), データシート (5 ページ), 概要 (1 ページ), パンフレット (8 ページ), 補足マニュアル (6 ページ), クイック・インストール・マニュアル (13 ページ)

ページを印刷する
Allied Telesis AT-8948 設定方法

Related How To Notes

For a detailed discussion of redundancy options on the server side, see How to Configure
Microsoft Windows 2003 Network Load Balancing Clustering with Allied Telesis Switches.
The following other How To Notes also use VRRP:
How To Configure An L3 Switch To Use Different MAC Addresses On Different VLANs
How To Configure Load Balancer Redundancy on Allied Telesis Routers and Switches
How To Notes are available from www.alliedtelesis.com/resources/literature/howto.aspx.

Example network

The two core switches are Layer 3 routing and define the IP address ranges for the VLANs
configured on the switches. The core switches are also running VRRP to provide router
redundancy for end devices such as the PCs and servers. The end devices are connected to
the core switches through Layer 2 distribution switches.
The core switches are configured with unique static IP addresses for each VLAN but share a
common virtual IP address for each VLAN. VRRP associates a virtual MAC address with
Page 2 | AlliedWare™ OS How To Note: VRRP
ports 3-24
distribution switch 1
2
port 1
port 1
2
3
23, 24
core switch 1:
VRRP master
3-24
distribution switch 2
1
2
server farm
Related How To Notes
3-24
distribution switch 3
1
2
port 1
2
3
23, 24
core switch 2:
VRRP backup
example.eps
...
...