- ページ 10

プリンター Dell 5530 Mono LaserのPDF サービスマニュアルをオンラインで閲覧またはダウンロードできます。Dell 5530 Mono Laser 46 ページ。 Loading paper and specialty media
Dell 5530 Mono Laser にも：クイック・リファレンス・マニュアル (2 ページ), セットアップおよび仕様マニュアル (29 ページ), セットアップと仕様 (29 ページ)

With today's ever increasing demands placed on data transfers with high-definition video content, terabyte storage devices, high megapixel

count digital cameras etc., USB 2.0 may not be fast enough. Furthermore, no USB 2.0 connection could ever come close to the 480Mbps

theoretical maximum throughput, making data transfer at around 320Mbps (40MB/s) — the actual real-world maximum. Similarly, USB

3.0/USB 3.1 Gen 1 connections will never achieve 4.8Gbps. We will likely see a real-world maximum rate of 400MB/s with overheads. At this

speed, USB 3.0/USB 3.1 Gen 1 is a 10x improvement over USB 2.0.

Applications

USB 3.0/USB 3.1 Gen 1 opens up the laneways and provides more headroom for devices to deliver a better overall experience. Where USB

video was barely tolerable previously (both from a maximum resolution, latency, and video compression perspective), it's easy to imagine

that with 5-10 times the bandwidth available, USB video solutions should work that much better. Single-link DVI requires almost 2Gbps

throughput. Where 480Mbps was limiting, 5Gbps is more than promising. With its promised 4.8Gbps speed, the standard will find its way

into some products that previously weren't USB territory, like external RAID storage systems.

Listed below are some of the available SuperSpeed USB 3.0/USB 3.1 Gen 1 products:

•

External Desktop USB 3.0/USB 3.1 Gen 1 Hard Drives

•

Portable USB 3.0/USB 3.1 Gen 1 Hard Drives

•

USB 3.0/USB 3.1 Gen 1 Drive Docks & Adapters

•

USB 3.0/USB 3.1 Gen 1 Flash Drives & Readers

•

USB 3.0/USB 3.1 Gen 1 Solid-state Drives

•

USB 3.0/USB 3.1 Gen 1 RAIDs

•

Optical Media Drives

•

Multimedia Devices

•

Networking

•

USB 3.0/USB 3.1 Gen 1 Adapter Cards & Hubs

Compatibility

The good news is that USB 3.0/USB 3.1 Gen 1 has been carefully planned from the start to peacefully co-exist with USB 2.0. First of all,

while USB 3.0/USB 3.1 Gen 1 specifies new physical connections and thus new cables to take advantage of the higher speed capability of

the new protocol, the connector itself remains the same rectangular shape with the four USB 2.0 contacts in the exact same location as

before. Five new connections to carry receive and transmitted data independently are present on USB 3.0/USB 3.1 Gen 1 cables and only

come into contact when connected to a proper SuperSpeed USB connection.

Windows 8/10 will be bringing native support for USB 3.1 Gen 1 controllers. This is in contrast to previous versions of Windows, which

continue to require separate drivers for USB 3.0/USB 3.1 Gen 1 controllers.

Technology and components