- ページ 12

電動おもちゃの車 DHK Hobby 8381のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。DHK Hobby 8381 17 ページ。 1/8 scale 4wd brushless electric buggy

ページを印刷する

1-Antenna: pull up the antenna straight before use.

2-Power switch: slide the switch to turn on or off.

3-Power LED: shows the power strength. Green LED shows full power, Yellow LED flashes

when the power is running short.

4-Charging

port:

charges

Ni-Mh

or Ni-Cd

rechargeable. NEVER charge your alkaline batteries.

5-Throttle trigger: Please refer to the transmitter diagram.

6-Steering wheel: Please refer to the transmitter diagram.

7-ST-D/R trim: adjust the steering servo angle ranging from 0% to 120%.

8-TH-D/R trim: adjust the throttle servo angle ranging from 0% to 120%.

9-ST-TRIM: adjust the steering neutral position, from 0% to 20%.

10-TH-TRIM: adjust the throttle neutral position, from 0% to 20%.

11-ST-NOR/REV: slide to left or right to choose steering mode.

12-TH-NOR/REV: push the trigger or pull it back to choose the throttle mode.

13-Throttle trigger trim screws: use a hex driver to tighten or loosen the screw to a comfortable

level.

14-Battery compartment cover: to open the compartment, slide the cover to OPEN direction as

indicated, snap it to close the compartment.

15-Battery case: open the battery cover, install 4 pcs AA 1.5V alkaline or rechargeable

batteries based on the "+" & "-" poles. If the status LED flashes red, the transmitter batteries

may be weak, discharged or possibly installed incorrectly. Replace with new or freshly charged

batteries. The power indicator light does not indicate the charge level of the battery pack

installed in the model.

Parts Diagrams

Receiver Functions

Frequency range

2.4GHz m odulation

Sensitivity

Working voltage

Working current

Size

Weight

batteries

only.

Alkaline

batteries

are

: 2.4GHz

: AFHDS

: -100dbm

: DC4.8 -6.0V

: 5.7*26*15.2mm

: 11.2g

not