- ページ 15

アクセサリー AVZ Twins PiazzolaのPDF インストール手順をオンラインで閲覧またはダウンロードできます。AVZ Twins Piazzola 20 ページ。 Gastro awning

ページを印刷する
AVZ Twins Piazzola インストール手順
Assembly instructions Twins
21. The legs of the Piazzola must be placed on a standard concrete die (7700 317-068), which must be
poured in to create a die with a size of 35 cm (length) x 35 cm (width) x 20 cm (height). Attach the
steel base plate, which is later fastened to the concrete die, to the bottom of the leg.
22. Use the Piazzola drilling template or the sizes below to drill holes of 7 mm in the left and right side
guides for attachment to the cover supports.
23. Slide the mounting plate of the fabric support into the side guide, place it in the required position,
and use it to fasten the support.
24. Slide the mounting plate of the top hinge into the side guide. Fasten the top hinge at the required
position of the side guide. Leave space for the nut on the outside.
25. Slide the guide plate into the top of the side guide. Use a rubber hammer to fasten.
Note: The lockset can now be assembled if used (see point 47).
Piazzola
Butterfly awning
®
®
7700 317-068 Standard concrete die
Twins Piazzola EN 27-08-2018
Poured concrete 35x35x20 cm
Page 15