- ページ 2
デジタルカメラ Allied Vision Mako U USB3 VisionのPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Allied Vision Mako U USB3 Vision 2 ページ。
ページを印刷する
Acquiring images
Troubleshooting
To find solutions for unexpected events, see Chapter Troubleshooting in the Mako U Technical
Manual.
1.
Connect your USB camera to your PC via USB 3.0 cable.
2.
Start Vimba Viewer. For instructions on Vimba Viewer, see Vimba Quickstart Guide provided with the Vimba
download.
3.
Select the camera in Vimba Viewer.
The main window opens.
4.
Start acquisition to acquire the first images with your USB camera.
Using third-party software
Using the camera with third-party software
Allied Vision USB cameras comply with USB3 Vision V1.0.1 standard. They can be used with
every third-party software that complies with the USB3 Vision standard.
All manuals and user guides at all-guides.com
Camera I/Os and LEDs
2
Pin
Line
1
0
2
1
3
2
4
3
5
---
6
---
LED signal pattern
Standards conformity
CE, RoHS
Contacting Allied Vision
For ordering and general information
https://www.alliedvision.com/contact
Support
3
6-pin I/O connector
1
6
5
Status LED (red)
3
4
Status LED (green)
Signal
<->
Level
GPIO 1
I/O
U
(low) = 0 to 0.8 VDC
in
non-isolated, programmable
U
(high) = 2 to 24 VDC
in
U
out
U
out
GPIO 2
I/O
U
(low) = 0 to 0.8 VDC
in
non-isolated, programmable
U
(high) = 2 to 24 VDC
in
U
out
U
out
In 1
In
U
(low) = 0 to 1.0 VDC
in
opto-isolated
U
(high) = 3 to 24 VDC
in
Out 1
Out U
out
opto-isolated, open collector
U
out
Isolated GND for isolated I/O
---
---
GND for GPIOs
---
---
Status
Camera startup
Power on
Command or image traffic
Camera busy
WEEE
FCC
Telephone
EMEA: +49 36428-677-0
The Americas: +1 978-225-2030
Asia-Pacific: +65 6634-9027
China: +86 (21) 64861133
USB 3.0 Micro-B connector
(low) = 0 to 1.0 VDC
(high) = 3.3 to 24 VDC @ max. 25 mA (open collector)
(low) = 0 to 1.0 VDC
(high) = 3.3 to 24 VDC @ max. 25 mA (open collector)
(low) = 0.3 to 2 VDC
(high) = 3 to 24 VDC @ max. 25 mA (open collector)
USB3 Vision
GenICam
4