- ページ 10

ティラー EarthQuake MC43ECEのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。EarthQuake MC43ECE 10 ページ。 Mini-cultivator

Dk43 DETHaTCHER kIT INSTallaTION (OPTIONal aCCESSORy)

The Dethatcher Kit is very effective for lifting away the excessive matted layers of thatch that can prevent moisture, oxygen and

nutrients from penetrating the soil and can harbor disease and insects. Use in Spring, Summer, and Fall to bring life and color back

to your lawn.

1. Disconnect spark plug wire from spark plug. Remove the cultivating tines (if so equipped). Refer to exploded view below for

detailed assembly.

2. Slide the Left and Right Dethatcher Assemblies onto the tine shaft making sure the Right Assembly is installed on the right side

and Left Assembly is installed on the left side as defined from the user's position.

3. Secure dethatcher assemblies using the hairpins (46134).

4. Slide dethatcher shield over the unit's tine shield from the rear of the unit and secure using bolts (4694), washers (4692), and nuts (4694).

5. Secure the lower part of the dethatcher shield to the drag stake mount using the detent pin (46145). Re-connect spark plug wire.

6. Install wheel extension plate (4676) using additional bolts (46142) and nuts (4650).

NOTe: The drag stake should not be used when using the dethatcher kit.

46134

Hairpin

hairpin

4708

Right Side

right side

Dethatcher

dethatcher

Assembly

assembly

slide shield forward

Slide Shield Forward

Check for parts online at www.getearthquake.com or call 800-345-6007 M-F 8-5

4691

Bolt

bolt

4692

washer

Washer

DK43 Dethatcher Kit (fits both Models MC43 & MC43E or stand-alone as MD43)

4651

tine shaft

Tine Shaft

4694

nut

Nut

4676

plate wheel extension

Plate Wheel Extension

Operator's Manual

MC43 Series Mini-Cultivator

46134

4707

Left Side

left side

Dethatcher

dethatcher

Assembly

assembly

46145

446145

Detent Pin

detent pin

4650/46142

nuts/bolts (4 each)

Nuts/Bolts (4 each)

4650/46142