- ページ 7

ティラー EarthQuake MC440のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。EarthQuake MC440 7 ページ。 4-cycle cultivator
EarthQuake MC440 にも：取扱説明書 (3 ページ), 取扱説明書 (2 ページ)

ページを印刷する

DK43 DETHATCHER KIT INSTALLATION (OPTIONAL ACCESSORY)

The Dethatcher Kit is very effective for lifting away the excessive matted layers of thatch that can prevent moisture, oxygen and

nutrients from penetrating the soil and can harbor disease and insects. Use in Spring, Summer, and Fall to bring life and color back

to your lawn.

1. Flip the ON/OFF switch to the OFF position. Remove the cultivating tines and the drag stake (SEE PAGE 12).

2. Unscrew mount bolts/nuts that connect the wheel bracket to the drag stake mount and set wheel bracket aside. SEE FIGURE 13

3. Slide dethatcher shield over the unit's tine shield from the rear of the unit and secure using bolts (176) and nuts (400020).

SEE FIGURE 12

3. Secure the lower part of the dethatcher shield to the drag stake mount using the detent pin (46145).

4. Install wheel extension plate (4676) using additional bolts (46142) and nuts (4650). Make sure wheel extension is facing the right

direction. (The side, with the two holes flush to the edge, connects to the drag stake mount) SEE FIGURE 13

a. With the mount bolts/nuts attach the wheel extension to the drag stake mount.

b. Then with the bracket bolts/nuts (included with the Dethatcher Kit) attach the wheel bracket to the wheel extension.

5. Slide the Left and Right Dethatcher Assemblies onto the tine shaft making sure the Right Assembly is installed on the right side

and Left Assembly is installed on the left side as defined from the user's position. SEE FIGURE 14

6. Secure dethatcher assemblies using the hairpins (4652). The hairpins go through the inner holes of the tine shaft.

NOTE: The drag stake should not be used when using the dethatcher kit.

slide shield

forward

secure with

detent pin

FIGURE 12

right side dethatcher

assembly

FIGURE 14

bolt

(176)

nut

(400020)

bolt

hairpin

(176)

nut

(400020)

bracket bolts/nuts

(4647/4650)

wheel

bracket

wheel

mount bolts/nuts

extension

(46142/4650)

FIGURE 13

hairpin

tine shaft

Operator's Manual

MC440 4-Cycle Cultivator

drag stake

mount

detent

left side dethatcher

assembly