- ページ 13

アクセサリー AW-Lake EDG2のPDF インストレーション・オペレーション＆メンテナンス・マニュアルをオンラインで閲覧またはダウンロードできます。AW-Lake EDG2 18 ページ。 The edge flow sensor with bluetooth

Analog Output Type and Forced Outputs

(Figure 12)

The toolkit allows the user to select different Voltage output

ranges. This is done by selecting the pulldown menu and

choosing between the four options available. Click Set after

selection is made.

• 0-5V

• 1-5V

• 0-10V

• 2-10V

The toolkit also allows the user to force one or both analog outputs. This is done by checking

the box and entering in the desired value. Click Set when done to have outputs take effect.

*Note: information will not be stored until SET is pressed and forced value will revert back to previous

value or state if output value is outside of the range.*

Warning modifying these outputs could result in inaccurate analog outputs.

This menu is provided to adjust the EDGE analog output to correspond correctly with the

analog output of the input device.

* It is intended for use with slight output differences. These values

are factory calibrated before shipping to match meters that are

calibrated yearly. *

In the top left corner of the toolkit is the Setup tab. This is

where you will find the analog output Calibration. (Figure 13)

Channel A – Voltage Output

Channel B – mA Output

Figure 12: Forced output and Type

Figure 13: Output Calibration

13 |

P a g e