- ページ 13

エクササイズバイク 360 Fitness YK-BK1704のPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。360 Fitness YK-BK1704 14 ページ。 Spinning bike

3. With any signal been transmitted into the monitor, the value of TIME, DISTANCE,

CALORIES start to count up as Drawing C. When there is any function has been preset the

target (TIME or DISTANCE or CALORIES), the function will be counting down from the

preset to zero while the training starts. Once the target is achieved to zero, the monitor start to

beep for 8 seconds, and the function will be counting up from zero directly if the training is

going. Press "MODE" button for confirmation and skip to next set-up.

4. In SCAN mode shown as "Drawing C".

TIME/DISTANCE/CALORIES/PULSE/(RPM/SPEED) will skip to display in every 6

seconds. The order is as follows.

5. You can also press "MODE" button to select single function display except RPM & SPEED

function. The RPM & SPEED function will switch display.

Note:

1. Stop training for 4 minutes, the computer will enter to Sleep mode.

You may press any button to have the computer restart working, the original value will retain.

(If re-install batteries, the original value will remove.)

2. If the computer displays abnormally, please re-install battery and try again.

3. Battery Spec: 3V CR2032 (1PC).

Battery installation instruction:

Drawing C