- ページ 2

シード選手 EarthWay 1001-BのPDF 組立説明書をオンラインで閲覧またはダウンロードできます。EarthWay 1001-B 8 ページ。 Precision garden seeder
EarthWay 1001-B にも：組立説明書 (7 ページ), 組立・取扱説明書 (5 ページ), 操作説明 (5 ページ)

ページを印刷する

Assembly and Operation Instructions

Assembly Steps

REAR WHEEL

Lower kick stand at front to hold planter

Step 1:

upright.

Remove nut, bolt, and axle (22, 18, & 25) from

Step 2:

frame.

Insert axle through rear wheel (17), place

Step 3:

between frame, and line up with holes in end of frame.

Reinstall bolt and nut (18 & 22), and tighten.

Step 4:

HANDLE

Remove nuts and bolts from Plastic Bag.

Step 1:

(These are special lock nuts. A wrench will be required to

remove and install them).

Bolt handle (8) in place using bolt & nut (13 &

Step 2:

14) as shown in Figure 1, Page 3 for illustration.

Install the Row Marker Retainer Clip (10) from

Step 3:

the front to the back and press into place in the holes on

the handle.

ROW MARKER

Place row marker shaft (1) in front of row

Step 1:

marker bracket and line up holes.

Insert clevis pin (7) through row marker shaft

Step 2:

(1) and row marker bracket, and insert hair pin clip (6)

through clevis pin. When not in use, secure the row

marker shaft to the Handle Bracket w/Clip (10) to hold in

place.

A cord may be tied to the Handle Bracket

Step 3:

w/Clip(10) and row marker shaft (1) for lowering and

raising the row marker.

Earthway_1001-B Manual_v1

PAGE 2