- ページ 2

プロジェクターアクセサリー Christie 104-006101-XXのPDF 取付説明書をオンラインで閲覧またはダウンロードできます。Christie 104-006101-XX 12 ページ。 Stacking frames

Stacking Frame Installation Instructions

Warnings

Christie stacking hardware is required to prevent the top projector from sliding

off the stack. Failure to incorporate this hardware may cause injury or death.

This procedure must only be performed by a qualified service technician.

The frame is designed to support a maximum stacking capacity of three

projectors. Always stack before hoisting.

Never attempt to physically carry a stack of projectors. Always follow the

Hoisting Procedure, outlined on page 6.

Use metric hardware only. Never force incompatible threads.

Always use all rigging points.

The stacking frame handles have a maximum load capacity of 360 lbs.

The projectors can be stacked and hoisted in either an upright or inverted

position. Do not mix orientations in a stack (i.e. inverted and upright).

All rigging must be in compliance with applicable local safety codes.

Only licensed riggers should perform the procedures outlined in this document.

013-100342-01 (Rev.1) (08/06)

Figure 1. Projector with Stacking Frame

2 of 12 pages